Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.
See energy as an examiner sees it: name the stores, label the transfer pathway, conserve every joule and calculate with a disciplined route.
Core foundationsSupplement equationsATP energy evidenceInteractive notebook
Track stores, name the transfer pathway, conserve the total, then calculate.
1
Where energy is located
Energy stores
Energy can be stored kinetically, gravitationally, chemically, elastically, nuclearly, electrostatically and internally.
Energy is a quantity that is stored in physical systems and transferred during events. Start every explanation by identifying what system has less energy and what system has more.
Use the exact store names. Electricity, light and sound are transfer pathways, not stores.
Store mnemonicK G C E N E I
Kinetic · Gravitational potential · Chemical · Elastic · Nuclear · Electrostatic · Internal. Say it as “Kick Giants, Charge Elastic Nests—Electrons Inside.”
Store
Recognise it from…
Exam-safe example
kinetic
moving object or moving fluid
rolling trolley, flowing water, wind
gravitational potential
height in a gravitational field
raised load, water behind a dam
chemical
fuel, food, cells or batteries
fuel before combustion
elastic (strain)
stretched or compressed object
spring or elastic cord
nuclear
atomic nuclei
nuclear fuel
electrostatic
separated charges
charged plates
internal (thermal)
particle motion and arrangement
warm brakes or surroundings
Write the decreasing store, the transfer pathway and every important increasing store.The spring transfers energy mechanically to the trolley and surroundings.
Interactive · Store Spotter
Which store belongs to a moving trolley?
High-frequency trap: electricity, light, sound and heating are not stores. They describe transfer by currents, waves or heating.
One-mark precision: write “internal (thermal) energy store,” not just “heat energy.” Heat describes energy in transfer.
2
How energy moves between stores
Energy transfers
Mechanical work, electrical work, heating and waves describe transfer pathways rather than extra stores.
In a lamp, energy is transferred electrically to the lamp and then to surroundings by radiation and heating.
Name what moves between stores and the pathway that transfers it.
store decreases $\xrightarrow{\text{transfer pathway}}$ store(s) increase
By forces
A force acts through a distance: mechanical work is done.
By currents
Charges move through a circuit: electrical work is done.
By heating
A temperature difference causes energy transfer from hotter to cooler.
By waves
Electromagnetic, sound and other waves carry energy between systems.
Write the decreasing store, the transfer pathway and every important increasing store.Write the decreasing store, the transfer pathway and every important increasing store.Write the decreasing store, the transfer pathway and every important increasing store.Write the decreasing store, the transfer pathway and every important increasing store.
Sentence frameFROM · BY · TO
Energy is transferred from the named decreasing store, by the named pathway, to the named increasing store(s).
Mark-scheme habit: separate the store from the pathway. “Chemical to kinetic” may earn store marks; adding “by electrical working” earns the pathway idea.
Quick Check · A lamp warms a black card across a gap. Give the complete energy statement.
The source store decreases; energy is transferred to the card by electromagnetic waves, increasing the card’s internal store.
3
The total is never lost
Conservation of energy
Friction transfers energy into internal stores.
Energy is not destroyed when dispersed; it often becomes less useful because it is spread across the surroundings.
The principle of conservation of energy states that energy cannot be created or destroyed; it is transferred between stores. For a closed accounting boundary, total input equals total output.
total energy before = total energy after
Conservation requires total output energy to equal total input energy.Use vertical height change. If resistance acts, not all lost gravitational energy becomes kinetic energy.
Worked: a fall with resistance
An object loses 160 J from its gravitational store. Air resistance transfers 30 J to internal stores.
Kinetic energy gained $=160-30=130$ J.
At the lowest point the kinetic store is greatest; at an extreme position the gravitational store is greatest.
Interactive · Energy Balance
Find the unaccounted output
“Wasted” does not mean destroyed. It means transferred to stores where the energy is less useful for the intended purpose—usually spread through internal stores.
Conservation statement: do not write only “energy is conserved.” Name the stores and quantify the balance when data are supplied.
Pause · explain it yourself
What changes when bicycle brakes slow a bicycle and warm up?
Compare, then improve
The bicycle’s kinetic store decreases while internal energy of brakes and surroundings increases through work against friction.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
4
Energy in motion
Kinetic energy
Kinetic energy is ½mv².
At fixed mass, doubling speed multiplies kinetic energy by four.
$E_k=\dfrac12mv^2$
Square the speed before multiplying by half the mass.
Convert mass to kilograms.
Write the equation before substituting.
Square the speed, not the whole expression.
Multiply by mass and one half.
Give energy in joules.
Worked: direct calculation
$E_k=\frac12(3.0)(4.0)^2=24$ J.
For fixed mass, doubling speed makes kinetic energy four times as large.
Scaling mnemonicSpeed gets the square
At fixed mass: double speed → four times $E_k$; triple speed → nine times $E_k$.
Square the speed before multiplying by half the mass.
Interactive · Kinetic-Energy Engine
Change mass and speed
Calculator trap: $\frac{1}{2}\times3\times4^2=24$, not 12 and not 144.
Rearrangement: to find speed, first obtain $v^2=2E_k/m$, then take the positive square root because the question asks for speed.
5
Energy from position in a field
Gravitational potential energy
Gravitational energy change is mgΔh in an approximately uniform field.
Use vertical height, not slope length.
$\Delta E_p=mg\Delta h$
Use the vertical change in height, not the distance travelled along a slope.
Use mass
If mass is given, multiply $m\times g\times\Delta h$.
Use weight
If weight is given, $ΔE_p=\text{weight}\times\Delta h$ because weight $=mg$.
Use modest speeds, secure the ramp, keep the run-out clear and repeat readings.
Ramp trap: the object may travel 5.0 m along a ramp but rise only 1.2 m. Use 1.2 m in $mgΔh$.
Worked: decrease
A 20 N object falls 7.0 m. The store change is $(20)(-7.0)=-140$ J: a decrease of 140 J.
Use vertical height change. If resistance acts, not all lost gravitational energy becomes kinetic energy.
Interactive · GPE Calculator
Choose the sign of the height change
Communication: if the object falls, give “decrease of … J” or a negative change. Do not label a positive magnitude as an increase.
Pause · explain it yourself
Why is gravitational energy change the same for two paths between the same heights?
Compare, then improve
For fixed mass and g it depends on vertical height difference, not path length.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
6
Energy transferred by a force
Work done
Mechanical work is energy transferred by a force through a displacement in its direction.
W = Fd applies directly when force and displacement are parallel.
One joule is one newton metre.
Choose the relevant displacement, not just any distance mentioned.
A supporting force does no mechanical work on a stationary bag during a hold, though the person’s body still uses energy internally.
A force perpendicular to displacement does no work through that displacement.
Applied-force work need not equal kinetic energy gain when other forces also transfer energy.
Mechanical or electrical work done equals energy transferred.
$W=Fd=\Delta E$
For a force parallel to the movement, work done is force multiplied by distance.
Worked: push a crate
$W=(35)(6.0)=210$ J. The force transfers 210 J mechanically.
Calculate force × distance for each case.
Equation mnemonicForce through distance transfers energy
Newton × metre = joule. The stated distance must be along the force direction in this syllabus equation.
The resistive force transfers energy mechanically from the kinetic store to internal stores.
Interactive · Work Calculator
Parallel force and displacement
Unit trap: centimetres must become metres before multiplying by newtons if you want joules.
Braking route: kinetic energy decrease = work done by resistive force. This creates the useful bridge $\frac{1}{2}mv^2=Fd$ when the object stops.
Pause · explain it yourself
Does the supporting force do mechanical work on a bar held motionless overhead?
Compare, then improve
No displacement occurs, so no mechanical work is done on the bar by that force during the hold.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
7
Conservation drawn to scale
Sankey diagrams
In a Sankey diagram, arrow width represents energy or power consistently, and total output width equals total input width.
Conservation requires total output energy to equal total input energy.
A simple flow diagram names and quantifies transfers. A Sankey diagram adds a visual rule: arrow width is proportional to energy.
Arrow width represents energy. The widths leaving a junction add to the incoming width.
Read the total input.
Add every labelled output.
Use input = useful + all dissipated outputs.
For a missing width, subtract widths at the junction.
Check that wider means more energy.
Arrow width represents energy. The widths leaving a junction add to the incoming width.
Interactive · Sankey Width Decoder
Find the missing branch width
Not drawn to scale? If the figure explicitly says not to scale, calculate from the labelled values. If widths are the data, measure or subtract them as instructed.
Formal efficiency boundary: this page interprets useful fractions through conservation. The efficiency equations are taught fully in Topic 1.7B.
8
Hard questions become a ledger
Multi-stage energy changes
When resistance is negligible, lost gravitational energy can become kinetic energy.
If resistance matters, include internal energy and other outputs.
Write a conservation statement before inserting numbers.
Choosing a zero reference height does not mean gravity is absent there.
Take a square root only after isolating v².
At lower points the gravitational store is smaller and the kinetic store is usually larger.
Exam routineB-S-T-C-A
Boundary → starting Stores → Transfer pathways → changed stores → Conserve → Answer with unit and direction of change.
Use vertical height change. If resistance acts, not all lost gravitational energy becomes kinetic energy.
Worked: two-stage ledger
Lost GPE $=(2.5)(10)(12)=300$ J.
Internal gain = 75 J, so kinetic gain $=300-75=225$ J.
$225=\frac{1}{2}(2.5)v^2$, hence $v=13.4$ m/s.
The resistive force transfers energy mechanically from the kinetic store to internal stores.Conservation requires total output energy to equal total input energy.
Interactive · Multi-stage Ledger
Split lost GPE between kinetic and internal stores
Multiple changes: if a lifted object also speeds up, the work input can equal gravitational gain + kinetic gain + dissipated transfer. Do not force the entire input into one store.
9
Alternative to Practical
ATP Lab Lens: turn energy claims into defensible measurements
Use modest speeds, secure the ramp, keep the run-out clear and repeat readings.
Practical mnemonicM-H-V-R-U
Measure Mass · vertical Height · speed/velocity Validly · Repeat · judge within Uncertainty.
Quantity
Method
Examiner-sensitive detail
mass
zeroed balance
include flag and attachments
vertical height
metre rule / plumb reference
same trolley reference point at both positions
speed
light gate or fixed video
gate close to bottom; camera perpendicular
energy
calculate $mgΔh$ and $\frac{1}{2}mv^2$
SI units before substitution
Pull steadily so the force is approximately constant and measure distance in the force direction.
Direct work technique: if the pulling force is approximately constant and parallel to the motion, measure the force and distance, then calculate $W=Fd$. Use newtons and metres so the answer is in joules.
Conservation requires total output energy to equal total input energy.
Limitation
Effect
Targeted improvement
height measured along ramp
GPE overestimated
measure vertical separation
push at release
extra kinetic energy
use a repeatable gate/release with no push
gate far from bottom
more energy dissipates before reading
place gate close to comparison position
camera angled
distance distorted
camera perpendicular, scale in plane of motion
one reading
random spread unknown
repeat, mean and retain justified anomaly notes
Safety: secure ramps and stands, use modest trolley speeds, keep the run-out clear, keep faces and hands outside the launch line, and switch off motors before adjustment.
Conclusion wording: “The values agree within experimental uncertainty, supporting conservation,” or “The kinetic value is consistently smaller because energy transfers to internal stores.” Never claim proof from one trial.
10
One-page visual recall
Topic 1.7A Master Sheet
Track stores, name the transfer pathway, conserve the total, then calculate.
Equation bank
$E_k=\frac{1}{2}mv^2$
$ΔE_p=mgΔh$
$W=Fd=ΔE$
input = useful + dissipated
Memory board
KGCENEI · seven stores
FROM–BY–TO · explanation frame
Speed gets the square · kinetic energy
Vertical height · gravitational energy
Widths add · Sankey
BSTCA · multi-stage ledger
Use the exact store names. Electricity, light and sound are transfer pathways, not stores.Name what moves between stores and the pathway that transfers it.Arrow width represents energy. The widths leaving a junction add to the incoming width.
If the question shows…
First move
an event description
identify decreasing store, pathway and increasing stores
speed and mass
convert kg, square speed, use $\frac{1}{2}mv^2$
height
find vertical $Δh$ and use $mgΔh$
force through distance
use $Fd$ and connect to $ΔE$
several outputs
build a conservation ledger
Sankey diagram
make widths and labelled energies balance
ATP comparison
measure mass, vertical height and speed; repeat
Final answer audit: store or pathway? kilograms? speed squared? vertical height? centimetres converted? every output counted? joules attached? decrease/increase communicated?
Interactive mastery: 0 / 6 explored
Use all six explorers, then revisit the method that still takes longest.